Electromagnetic-Radiation-Protective-Hooded-Zipper-Vest-EMF-Shielding-Clothing-01-fxqk
Electromagnetic Radiation Protective Hooded Zipper Vest EMF Shielding Clothing
Electromagnetic Radiation Protective Hooded Zipper Vest EMF Shielding Clothing

Electromagnetic Radiation Protective Hooded Zipper Vest EMF Shielding Clothing
Size table (unit: cm). Size Description (Unit: CM). Pure hand measurement, there may be 1-2cm error, is normal, please forgive me! The products we sell. Custom-made electromagnetic radiation protective vests(including 2 customized solutions). Metal fiber single layer radiation protective vest. Specific composition of fabric: 41.8% cotton, 32.1% polyester fiber, 26.1% metal fiber. Shielding effectiveness: 12.2dB-49.4dB. The outer layer of metal fiber for this radiation protection suit has been in the market for a long time. The product technology is mature. The stainless steel fiber with ion precision quenching technology is blended with cotton fiber and polyester fiber. It is resistant to washing, good air permeability and good radiation protection effect. Metal fiber fabric is recommended for daily office, high-speed rail, small monitoring room, power plant, substation and so on. The thickness of the metal fiber fabric is similar to that of the common work clothes fabric, and it can be used to make clothes directly. Therefore, our metal fiber fabric work clothes are single layer. The maintenance method of metal fiber. Metal fibers are tough, and folding in a short time will not damage, but long-term folding and extrusion will produce metal fatigue and affect the metal structure. It is recommended to hang store metal fiber clothes. Can be directly washed, ordinary neutral detergent and detergent can be. Hand wash, can be brushed with soft brush, avoid rubbing and machine washing. After washing, you can’t wring it, remove it directly from the water, and keep it cool. You can’t bleach your clothes with bleach, or wash your clothes with a detergent that contains bleach. If the clothes appear pleated, the medium temperature irons, the temperature is not more than 110 degrees Celsius. It is recommended not wash as much as possible in case of improper washing. 100% Silver fiber double-layer radiation protective vest. Shielding effectiveness: 45.0dB-68.6dB. The silver fiber radiation protection suit is a high-tech product obtained by permanently bonding silver to a fiber surface through a special technique. This structure not only makes the silver fiber maintain the original textile property, but also gives it all the The magical function of silver, the magical effect of silver fiber. Silver has the most effective antimicrobial properties. Silver fiber radiation-proof fabric made of silver-containing fiber using nanotechnology is the latest radiation-proof technology in the world after metal anti-radiation fiber cloth. It has the functions of radiation protection, anti-bacterial and anti-fouling, and is the production of radiation-proof clothing. Its anti-radiation effect is superior to radiation-proof fabric made of other metal materials, which can be worn close to the body and beneficial to the human body. Silver fiber anti-electromagnetic radiation fabric is recommended for various military radar stations, electronic countermeasure, wireless communication base stations, civil aviation, meteorology, public security, high-speed, intelligent building monitoring rooms, electromagnetic compatibility laboratory, 5G communication, new energy vehicles, Overhaul of railway communication, etc. The silver fiber anti-electromagnetic radiation fabric is monotonous and relatively thin. It is not suitable for making clothing directly. It is usually used as the lining of the clothing. The outer layer is determined according to customer needs. Therefore, our silver fiber anti-electromagnetic radiation work clothes are double layers, and the outer layer is polyester-cotton fabric by default. Silver fiber anti-electromagnetic radiation fabrics exhibit excellent shielding performance under high-frequency electromagnetic radiation environments. The greater the shielding effectiveness value at a certain frequency point or frequency band, the better the protection effect, which is usually 30dB (equivalent to a shielding rate of 99.9%) The above is a very good effect. The maintenance method of silver fiber. Silver fiber exposed to the air can not avoid oxidation, the fabric will be black or yellow, is a normal phenomenon, does not affect the shielding effect. To reduce the oxidation of washing, it is recommended to wear a shirt inside, if do not use, it is recommended sealed. It is recommended to wash with well water, mineral water, pure water; (Reason: Some tap water contains chloride ion, and if the chloride ion is excessive, it is easy to react with silver to reduce the damage to silver by alkali and chlorine). Modest amount of neutral detergent, washing for a short time; (Do not use acidic detergent or laundry detergent). Can not rub and washing machine wash. It is recommended to wash or wash as little as possible to prevent improper washing effect of shielding. It is basically harmless to the human body. The steel in high-rise buildings is all steel. Ignite the attached fabric sample and find that the burnt sample is a very clean and fine network metal, which indicates that the fabric is very good in material and can effectively shield the radiation. The attached fabric sample is ignited and burned to a black globule after being completely burned with fire. After being crushed by force, it can be turned into a powder, which indicates that the material of the fabric is very good and can effectively shield the radiation. Radiation protection clothing and ordinary clothing fabrics are essentially different. Since metal fiber and silver fiber can conduct electricity, radiation protection suits are electrically conductive, while ordinary clothes are not electrically conductive. Bring your own multimeter, or take the radiation protection suit to the appliance maintenance department to check the conductivity of the radiation protection suit. (1)Ordinary clothing detection. The multimeter is adjusted to the 200Omega or 2KOmega position. When the multimeter pen is in contact with the test fabric and the distance is 10cm, the resistance value is 1 and the value of the multimeter when the object is not tested is 1, indicating that the ordinary fabric is non-conductive. (2)Metal fiber testing. The multimeter is adjusted to the 2kOmega gear position. When the multimeter pen is in contact with the test fabric and the distance is 10cm, the resistance value fluctuates around 0.421KOmega, indicating that the metal fiber radiation protection suit has conductivity, so it has anti-radiation effect. (3)50% Silver fiber testing. The multimeter is adjusted to the 200 Omega gear position. When the multimeter pen touches the test fabric and the distance is l0cm, the measured resistance value fluctuates around 1.1 Omega, indicating that the conductivity of the 50% silver fiber radiation protection suit not only is better than that of the metal fiber but also the radiation protection effect also better than metal fiber. (4)100% Silver fiber testing. The multimeter is adjusted to the 200 Omega position. When the multimeter pen is in contact with the test fabric and the distance is 10cm, the measured resistance value fluctuates around 0.4 Omega, indicating that the conductivity of the 100% silver fiber radiation suit is better than that of the 50% silver fiber fabric. The anti-radiation effect is also better. It can be seen from the test that the resistance value of 100% silver fiber is relatively small in the fabric, so the conductivity and anti-radiation effect of 100% silver fiber are also better. The essential difference between radiation-resistant fabrics and ordinary fabrics is that radiation-proof fabrics are conductive and ordinary fabrics are non-conductive, so test the radiation resistance with a multimeter to see if it is effective. (If there is no multimeter at home, you can take the clothes to the appliance repair department, let the maintenance master test). Professional radiation equipment test method. The first step: using radiation equipment to detect the host, radiation equipment will display the corresponding radiation value. The second step: use radiation suits to block the back of the chassis, in the middle of the radiation equipment and the rear of the host computer to block a layer of radiation protection suits, then see the display on the instrument value is 0, indicating that the host computer’s electromagnetic radiation is radiated Clothing shielded. This item is in the category “Clothing, Shoes & Accessories\Specialty\Vintage\Men’s Vintage Clothing\Vests”. The seller is “lzmi80″ and is located in this country: CN. This item can be shipped worldwide.
  • Color: Navy 100% Silver fiber
  • Size: M
  • Brand: Unbranded
  • Function: EMF shielding
  • Size Type: Regular
  • Product name: EMF shielding vest
  • Occasion: Everyday
  • Metal fiber fabric composition: 41.8% cotton, 32.1% polyester fiber, 26.1% metal fiber
  • Material: Silver fiber + polyester
  • Country/Region of Manufacture: China

Electromagnetic Radiation Protective Hooded Zipper Vest EMF Shielding Clothing